UV-H Rubber Blanket
Model: UV-H
Application: UV printings. Appropriate to package and metal UV printing.
Surface: Micro- ground and polished.
Compressible Layer: Micro-sphere 4PLY
Rotational Speed: 12,000Sheet/H
Details
Specification:
Thickness | Color | Hardness | Roughness | Elongation |
1.98/1.70 ± 0.02 mm | Red/Orange | 79 – 81 Shore A | 0.80 –1.0μm | ≤ 0.5%
|
Characteristic: UV solidification and ultraviolet rays resistant. Convenient use,
low thickness reduce for good print quality.
Attention:
1. Before installation pleasure measure the thickness of blanket for adjusting the
press accurately.
2. While installation please use the constant wrench to tighten gradually.
3. After installation please clean the rubber surface and ready for print.
4. During the use please often use the special solvent to clean the rubber surface
for extend the useful time.